Page 469 of 561

AC/OX CUTTING/WELDING/BRAZING The Combination Torch UCT-500 The Unitor Combination Torch UCT500 covers all normally occurring, heating, brazing, welding and cutting applications for which the acetylene/oxygen flame may be used on board. The torch is simple to use, light in weight compared to capacity, well balanced and easy to handle. It is a high-pressure torch of the equalized pressure type. One of the advantages of a high-pressure torch is an especially stable flame and high resistance to persistent flashback.

It includes a range of seven welding attachments, covering most brazing/welding applications. The larger attachments also function as monoflame heating attachments.

The connection between torch handle and heating/welding/cutting attachments is based on 0-ring seals which ensures a gas-tight connection even if the connection nut should loosen. Attachments are easily changed without the use of tools, and may be turned in any desired angle to the handle/gas valves.

In addition to spanner, cleaning needles and a spare parts kit with all the most commonly needed spares, the UCT-500 case contains an instruction book giving complete information on the use and maintenance of the equipment.

The gas valves are symmetrically placed at the back of the handle and suit both left-and right-handed persons.

Acetylene and Oxygen inlets are fitted with non-return valves as standard . The non-return valve is a spring-loaded valve which permits the gas to pass in one direction only; towards the blowpipe. It is fitted to the blowpipe handle to prevent any return flow which could allow gases to mix in the hoses, with the danger of hose explosions. Non-return valves, however, do not replace flashback arrestors in the gas supply system. UCT-500 Master kit in heavy duty PVC case

5.01

468

The UCT-500 Master kit has been assembled to cover all ordinary welding, brazing and cutting work that may occur on board.

Cutting nozzles covering cutting of steel up to 100 mm are included, also a roller guide for cutting edges from 90° to 45° angle of plate surface. The circular motion bar with centering pivot allows for cutting circular holes up to 960 mm diameter.

UCT-500 compact kit in heavy duty

PVC case

The compact kit contains the UCT-500 shank, the three most commonly used welding attachments (80 ltr, 230 ltr and 650 ltr) and the cutting attachment with nozzles for cutting up to 25 mm steel. Cleaning needles, spanner and full instructions for use and maintenance are also included. Conform to: EN /ISO 5172