Page 417 of 561

WIRE WELDING

Application set-up for TIG (Tungsten Inert Gas) welding

Select TIG welding

In this mode a constant current characteristic for TIG welding is set

Select polarity

Connect the TIG/MIG voltage selection cable to the negative (-) cable connection socket and the electrode holder to the Euro-contact. Connect the return cable to the + socket and return clamp directly to the work piece Connect gas Set amperage

TIG welding

Touch the electrode to the work piece and press the torch button. Shielding gas and very small “signal” current will start flowing. Lift the torch slowly, the signal current will initialize an arc and an upslope function that increases the current to set value.

-

+

Release the button (step 2) in order to start the slope-down function that gradually reduces the welding current to zero. The supply of gas will continue for the selected post-gas time.

4.03

416

Gas Supply Accessories

Product numbers

Gas regulator with flow adjustment 0-32 l/min, for Argon and Argon/CO2 Flow control meter for use at torch nozzle Flow control needle valve for gas flow adjustment at the gas inlet to the machine

Gas hose ¼” black, for shielding gas

Hose clamps, one ear for ¼” hose, non-protruding stainless, bag of 10 pcs Pliers for ear clamps Argon 10 litres Argon CO2 mix

197 619247 197 597328

TIG Accessories

Product numbers

197 597310 176 576157 401 729442 401 768507 715 905565

715 905573

TIG-Torch T-161 with 4 m cable, euro-connector and torch-mounted trigger 197 160010 TIG accessories kit 197 607810 The kit contains: – short back cap – spare heat-shield – 6 collets – 2 collet bodies – 4 nozzles – 3 electrodes 1.6mm – 3 electrodes 1.6mm