Page 416 of 561
WIRE WELDING Ordering Information
UWW-161 TP is supplied with:
• 2.5 m primary cable with Schuko plug, fitted on the welding machine 3 x 2,5 mm2 • Gas hose socket with nut and hose clamp for connection to gas inlet • Wire welding torch with 3 m cable and connector complete for 0.8 mm wire • Electrode holder for MMA (stick) electrode welding with 3 m cable and Dix 25 connector • 3 m return cable with Dix 25 connector and return clamp • Adjustable carrying strap • Instruction manual Unitor Wire Welder UWW-161 TP,
Skid Trolley for protection,
Trolly for machine, accessories and 1-2 10l shielding gas cylinders, Spare part kit* for UWW-161 TP
193 161161 191 764550 196 778149
191-150161
* Spare part kit includes power board, necessary additional components and complete instructions for replacement.
Application set-up for Stick Electrode welding
Select MMA (stick) welding:
In this mode a constant current characteristic for MMA welding is set and the terminals are live (10V). An automatic hot-start enables easy arc start. And an automatic arc-force maintains a smooth and stable arc by momentarily increasing the current if bigger droplets in the arc tends to produce short circuits.
An automatic anti-stick function will cut the power if the electrode should get stuck in the melt-pool so that it can be removed without damage.
Select polarity
Disconnect the TIG/MIG polarity selection cable from the +/- cable connection sockets.
-
+
4.03
Connect the electrode holder to the correct polarity for the electrode to be used.
Connect the return cable to the other socket. Connect the return clamp directly to the work piece.
415