Page 392 of 561

TIG WELDING

Regulator & Accessories The R510 regulator with flow meter supply a steadly stream of shielding gas to the torch. The flow rate in l/min is adjusted on the regulator. Actual gas flow at the TIG or wire torch may deviate from what is set on the gas outlet station or on the cylinder regulator, especially if long gas hoses are used. The Flowcontrol meter measures actual flow at the torch nozzle and is a useful tool for the operator. Combined with the Flowcontrol needle valve used at the gas inlet of the machine or the wire feeder full flow adjustment is available at the work place regardless of distance to the gas cylinder/gas outlet.

Also recommended are soft-skin TIG welding gloves. They give good protection of the hands while they ensure easy control of the torch and eventual welding rod. In addition standard protective equipment for arc welding should be used.

Product description

Argon regulator with flow adjustment 0-32 l/min Gas hose 1/4" black, for shielding gases Hose joint for 1/4" hose, 3/8" RH threads Clip 8-14 mm for hose, 10 pcs Quick coupling Argon, regulator to 6,3mm hose Quick coupling Argon, hose to hose, 6,3mm

Unit

pcs mtr pcs pck pcs pcs

Product no 197-510010 176-576157 176-175596 401-729442 197-320202

197-320201

Spare parts for regulator: Flow meter gauge for Argon 0-32 L/min Contents gauge for regulator Flowcontrol meter for use at torch nozzle Flowcontrol needle valve for use with machine/ TIG Gloves for TIG and Gas welding

pcs pcs pcs pcs 6 pairs

171-550210 171-550178 197-597328 197-597310 197-632795

4.02

391