Page 363 of 561
ELECTRODE WELDING AND GOUGING
Unitor Welding Cable
Welding cables used on board, on deck or in an engine room, are exposed to both rough weather, oil and mechanical wear. The welding_ cable supplied by Unitor has wear, flame and oil-resistant insulation on a polychloroprene rubber basis. It is recognized by its marking at regular intervals with the text “Unitor oil resistant welding cable”, size of cable, and the standard for welding cable H01N2-D.
It may also be ordered in other lengths, without connectors mounted.
Cable drum
The cable drum with crank and floor stand is used for storage of up to 100 m cable. The crank may be disengaged to avoid accidents when unwinding cable.
H01N2-D means that the cable is produced to an international harmonized standard.
The conductor is built up from 0.2 mm diameter tinned copper strands to ensure flexibility.
The cable is available in cross section areas 35 mm2, 50 mm2 and 70 mm2, and may be supplied in standard lengths of 10 m, 20 m or 50 m, fitted with Unitor Safety cable connectors.
Note that welding cables should always be stretched out when used, and excessive lengths should not be used. A coiled up cable, whether on a drum or in a coil on deck will act as an electromagnet when welding current is flowing. This will cause increased resistance in the welding circuit which may have negative influence on the welding result. The electromagnetic field created may also influence vulnerable equipment in the vicinity of the coil.
Cable size comparison AWG 3 2 1 1/0
mm2 26.7 33.6 42.4 53.5
AWG 2/0 3/0 4/0
mm2 67.4 85.0 107.2
4.01 Ordering information Crosssection area
mm2
Product no.
Max Amp at 60 % D/C
Weight kg/m Pr. meter
10m incl.
20 m incl.
50 m incl.
connectors connectors connectors
35
290
0,42
195-175836 195-175794
195-175786
195-175778
50
365
0,56
195-175844 195-175828
195-175810
195-175802
70
460
0,78
195-175851
195-320010
195-183665
95
560
1,03
195-655266
Cable drum for up to 100 m cable, order no.
362
195-175729