Page 327 of 561
RUBBERGRADE 6 REMOULD Product specification sheet – Rubbergrade 6 Remould
PRODUCT NAME
Product Description
KIT CONSISTS OF
Rubbergrade 6 Remould Product No 103-659292 Engineering Repair Fluid Rubbergrade 6 Remould
0,43 ltr Engineering Repair
Compound
Supplied complete with all
Gross Weight: 590 g
necessary equipment all in one
Identification
Application Data
PRODUCT NO
3 x 150 g packs Base + Activator
1 Spatula
1 Applicator
1 Pair of gloves
1 Technical Data Sheet
2 Safety Data Sheets
Activator Component
Base Component
Appearance
Colour
Appearance
Colour
Liquid
Brown
Liquid
Black
Mixing Ratio Volume
Mixing Ratio
Weight
Activator Base Activator Base -
-
-
-
Pot Life (mins) (Working Life) 5 °C
10 °C
15°C
20 °C
25 °C
30 °C
35 °C
40 °C
15
10
10
8
8
7
6
5
25 °C
30 °C
35 °C
40 °C
Recommended Temperature Limits For Application: 5 °C TO 40 °C Curing Time
Technical
Data
Curing Times in minutes at ambient temperature
3.06
10 °C
15 °C
20 °C
Initial Setting / Light Loading
60
50
35
25
25
20
15
15
Machining
480
240
180
180
150
150
150
120
Full Mechanical Strength
14 days 10 days 8 days 7 days 7 days 7 days 6 days 5 days
Full Chemical Resistance
18 days 15 days 14 days 12 days 12 days 8 days 7 days 7 days
Density g/cm3
Volume Solids
Volume Capacity
Slump Resistance
Activator Base Mixed
%
cc/1000gm
12 1/2 mm thickness
100
962
-
1,2 Phys/Mec Properties
5 °C
0,98
1,04
Tensile Strength
ASTM D412
7 MPa
Tear Strength
ASTM D624
4,5 MPa
1015 psi
Elongation
ASTM D790
250 %
Hardness (Shore A)
ASTM D2240
65
Dielectric Strength
ASTM D149
-
Surface Resistivity
ASTM D257
-
Volume Resistivity
ASTM D257
-
Dry heat
Wet heat
Minimum temp
+ 80 °C / 176 °F
+ 70 °C / 158 °F
- 20 °C / - 4 °F
650 psi
Values are determined after 48 hours at 20 °C Service Temperatures
Chemical resistance
Suitable for permanent immersion at 20 °C (68 °F) in a limited range of chemicals. For a more detailed description refer to the Chemical Resistance Chart.
Health and Safety
As long as good practice is observed Rubbergrade 6 Remould can be safely used. Wearing of rubber gloves is advisable during use. Prior to using this product please consult the Safety Data Sheet provided with each packaged product.
Manufactured under a quality program certified to ISO 9002
326