Page 309 of 561

AQUAGRADE REBUILD

defect. Apply on wet surfaces or underwater in the same manner as above water.

4. Machining

Once the AquaGrade Rebuild has cured for the minimum time indicated in the Curing Properties Section of the product specification sheet, sanding and grinding can be carried out using standard engineering practices.

5. Cleaning

All equipment should be cleaned IMMEDIATELY after each use with a cleaner. Failure to follow this procedure will result in application equipment becoming unusable. 6. Health and safety

3.06

308

As long as normal good practices are observed AquaGrade Rebuild can be safely used. A fully detailed Material Safety Data Sheet is included with the set. The information provided in this Instruction sheet is intended as a general guide only. Users should determined the suitability of the product for their own particular purposes by their own tests.

Leaking tanks