Page 303 of 561

METALGRADE HI-TEMP

Product specification sheet – Hi-Temp

Product Description

PRODUCT NAME

PRODUCT NO

Metal Grade HI-TEMP Product No 101-663427

0,13 l repair compound.

Kit weight 420 g.e

KIT CONSISTS OF

APPLICATION

Tin with repair compound, 5 pair of gloves, one working data sheet

For use on high temperature applications

With all kits comes 5 x pair of Gloves, 1 pc. Working data sheet, 1 pc. Safety Data Sheet

Identification

Tin with metallic grey paste

Application data

Mixing ratio

Pot life (mins) (working life)

Ready for use as supplied only stir

15*

* Paste will begin to dry and "skin" immediately when the tin is opened, although sub-surface phase will not dry fully for 16–24 hours Best applied when the ambient temperature is: 7 °C to 35 °C/45 °F–95 °F Curing time

Option 1)

Air dry for 16–24 hours then gradually raise temperature to operating conditions. Water blisters may appear if transition through 100 °C (210 °F) is too rapid.

Option 2)

Air dry for 5–7 hours then cure at 100 °C (210 °F) for 2–4 hours prior to operation.

Technical data Phys / Mec properties

Specific Gravity 1,56 g/cm3 Coefficient of thermal expansion ASTM E-831-93, °C-1 8x10-6 6 hours at room temp.

24 hours at room temp.

Shear Strength   6 hours at room temp. + ASTM D 1002   1 hour at 200 °C / 400 °F

3.06

Service temperatures

302

0,6 MPa   90 psi 1,9 MPa

280 psi

2,7 MPa

390 psi

24 hours at room temp. + Temp. Continuously

Temp. Intermittently

Minimum Temp.

+ 538 °C/1000 °F

+ 1093 °C/2000 °F

- 40 °C/- 40 °F

Chemical resistance

This product is resistant to a wide range of acids, bases and solvents. However, immersion service is not recommended due to it's slightly porous structure.

Health and Safety

As long as good practice is observed MetalGrade HiTemp can be safely used. Wearing of rubber gloves is advisable during use. Prior to using this product please consult the Safety Data Sheet provided with each packaged product.