Page 299 of 561
METALGRADE REBUILD
Product specification sheet – Metalgrade Rebuild
PRODUCT NAME
Product Description
KIT CONSISTS OF
Metalgrade Rebuild
Product No 101-659243 Engineering Repair Compound
Metalgrade Rebuild
0,5 ltr Engineering Repair
Compound
Gross Weight: 1,08 kg Supplied complete with all necessary equipment all in one
Identification
Application Data
PRODUCT NO
933 g Base + Activator
1 Mixing Container
1 Pair of Gloves
1 Spatula
1 Applicator
1 Roll reinforcement bandage
1 Technical Data Sheet
Activator Component
Base Component
Appearance
Colour
Appearance
Colour
Paste
Beige
Paste
Metallic Grey
Mixing Ratio Volume
Mixing Ratio
Weight
Activator Base Activator Base 1
2
1
2,5
Pot Life (mins) (Working Life) 5 °C
10 °C
15°C
20 °C
25 °C
30 °C
35 °C
40 °C
20
18
15
13
12
10
9
6
Recommended Temperature Limits For Application: 5 °C TO 40 °C Curing Time
Technical
Data
Curing Times in minutes at ambient temperature
5 °C
10 °C
15 °C
20 °C
25 °C
30 °C
35 °C
40 °C
Initial Setting / Light Loading
50
45
40
35
30
25
20
15
Machining
100
70
60
55
50
45
35
25
Full Mechanical Strength
8 days 6 days 5 days 4 days 3 days 3 days
48h
24h
Full Chemical Resistance
14 days 10 days 9 days 7 days 5 days 4 days 3 days 2 days
Density g/cm3
Volume Solids
Volume Capacity
Slump Resistance
Activator Base Mixed
%
cc/1000gm
15 mm thickness
100
540
Excellent
1,7
3.06
Phys/Mec Properties
1,9
1,85
Compressive Strength
ASTM D695
55 MPa
Tensile Shear Adhesion
ASTM D1002
19 MPa
8000 psi 2800 psi
Flexural Strength
ASTM D790
38 MPa
5600 psi
Corrosion Resistance
ASTM B117
Hardness (Shore D)
ASTM D2246
5000 hours
80
Hardness (Rockwell R)
ASTM D785
100
Nuclear Decontamination
BS 4247 Part 1
Excellent
Dry heat
Wet heat
Minimum temp
+ 90 °C / 195 °F
+ 80 °C / 176 °F
- 20 °C / - 4 °F
Values are determined after 48 hours at 20 °C Service Temperatures
Chemical resistance
Suitable for permanent immersion at 20 °C (68 °F) in a limited range of chemicals. For a more detailed description refer to the Chemical Resistance Chart.
Health and Safety
As long as good practice is observed MetalGrade Rebuild can be safely used. Wearing of rubber gloves is advisable during use. Prior to using this product please consult the Safety Data Sheet provided with each packaged product.
Manufactured under a quality program certified to ISO 9002
298