Page 287 of 561

LEAK STOP

Product specification sheet – Leak Stop Product Description

Product name/

Product No./Kit weight

Kit consists of:

Application

Leak Stop I

100-630384 / 158 g.e

1 pc. 2"x4' (50 mm x 1,2 m) black repair tape in a pouch

For use on pipe diameter 0–1" (0 mm–25 mm)

Leak Stop II

100-606006 / 232 g.e

1 pc. 2"x12' (50 mm x 3,6 m) black repair tape in a pouch

For use on pipe diameter 1"–2" (25 mm–50 mm)

Leak Stop III

100-630392 / 325 g.e

1 pc. 4"x12' (100 mm x 3,6 m) black repair tape in a pouch

For use on pipe diameter 2"–4" (50 mm–100 mm)

With all kits comes 1 x pair of Gloves, 1 pc. Working data sheet, 1 pc. Safety Data Sheet

Identification

Grey knitted fibreglass tape

Application data

Mixing ratio

Pot life (mins) (working life)

Ready for use as supplied only requires wetting with water before use

2–3 minutes

Recommended Temperature Limits For Application 5 °C to 30 °C/40 °F–100 °F

Curing time

Curing times in minutes at ambient temperature

20 °C (68 °F)

Initial setting

5

Full mechanical strength

30

Technical data

18 Gauge knitted fibreglass

Values are determined after 48 hours at 20 °C (68 °F)

3.06

Phys / Mec properties

Service temperatures

Chemical resistance Health and Safety

286

Bond Strength

ASTM D2095-72

16 kg/cm2

230 psi

Tensile Strength

ASTM D638-111

275 kg/cm2

3920 psi

Flexural Strength

ASTM D790-1-B

159 kg/cm2

2260 psi

Hardness (Shore D)

ASTM D2240

82 type (d)

Dry heat

Minimum temp.

+ 260 °C/500 °F

- 29 °C/- 20 °F

Suitable for permanent immersion at 20 °C (68 °F) in a limited range of chemicals. As long as good practise is observed Leak Stop can be safely used. Wearing of rubber gloves is advisable during use. Prior to using this product please consult the Safety Data Sheet provided with each packaged product.