Page 285 of 561

PRODUCT OVERVIEW

Repair Set

Each set comes complete with all necessary application equipment technical data sheets and Health & Safety Data sheets. Name Description

Leak Stop Pipe repair Sets

Leak Stop I Set Leak Stop II Set Leak Stop III Set Metalgrade Ready Stick Set

Metalgrade Express Set

3.06

Metalgrade Rebuild Set

Metalgrade Hi Temp Set

Aquagrade Rebuild Set

284

Set weight kg

Product no.

0,16 kg

100-630384

0,23 kg

100-606006

0,33 kg

100-630392

Base and activator in two separate sticks. Cut off the needed length and knead the two parts together till streak free. Use for sealing of leaks in pipes, tanks, ducts etc. Can be used together with Leak Stop to plug the hole before wrapping the tape. Set of 3 pairs of sticks giving: 0,72 kg Repair Compound

0,86 kg

101-659227

A two component extremely fast cold-curing metal repair compound supplied in Base and Activator containers. Used wherever there is an emergency and urgent need to get equipment back into action. Base & Activator giving: 0,25 l Rapid Repair Compound.

0,58 kg

101-659235

A two component normal cold-curing engineering repair compound. A good machineable product with high mechanical properties and good heat resistance.

Base & Activator giving:

0,50 l Engineering Repair Compound.

1,10 kg

101-659243

A ceramic and stainless-filled one part water based paste. It is temperature resistant up to 1093 °C (2000 °F). It is used to seal joints, defects, cracks and voids in cast iron, steel and stainless steel Tin giving: 0,13 l Repair Compound.

0,42 kg

101-663427

A two component engineering repair compound. The product can be mixed applied and will cure under water. Preferably mix above water.

Base & Activator giving:

0,5 l Engineering Repair Compound.

0,95 kg

104-659250

A special bandage impregnated with a resin system which is activated by immersion in water. Ideal for repairs to leaking pipes, simply immerse in water then wrap around the leak. The Metalgrade Ready Stick be used to plug the actual hole before putting on the tape.

For pipes ø< 1" (25 mm)

1 tape 2" x 4' (50 mm x 1200 mm) For pipes ø 1-2" (25 mm - 50 mm) 1 tape 2" x 12' (50 mm x 3600 mm)

For pipes ø > 2" (50 mm)

1 tape 4" x 12' (100 mm x 3600 mm)