Page 268 of 561

TIN 241 AG

Description and uses

Unitor SOLDERING TIN 241 AG is a soft soldering wire on a spool, the wire has ducts filled with high quality flux. The use of flux-filled ducts ensures that the flux melts before the solder. It is not normally necessary to apply any additional flux except in the case of materials having an oxide surface coating of high melting point (use liquid flux or hydrochloric acid). The surfaces must be clean and free from oily deposits, oxides, etc. Heat may be applied with a welding torch or a soldering iron. A soldering iron is recommended, but if a welding torch is used, adjust to a reducing flame and avoid direct contact between flame and solder. Apply the heat indirectly so that it travels through the metal to the soldering point.

A soldering iron is preferred.

Heat indirectly when using a welding torch.

3.05

267