Page 23 of 561

SAFETY IN WELDING 1.00

Work site protection

Welding Curtain

The purpose of the Welding Curtain is to avoid other personnel being harmed by the welding work taking place. The curtain blocks out all hazardous ultraviolet and infrared light from the welding arc, but still enables one to see trough the curtain. It is made of self-extinguishing material, but is not heat resistant to direct exposure to hot slag/iron spatter from the arc. Size: 2 m high and 1,3 m wide. The top of the curtain has 7 holes and the curtain comes complete with 7 heavy-duty hooks. With the hooks the curtain can be put in a frame, or hooked up on an existing pipe or wire. Maximum pipe diameter the hooks will fit on is 41 mm. In order for the curtain to be drawn freely the pipe should be less than 30 mm. It is possible to join two or more curtains together by the use of snap on buttons along the side. The curtain with hooks is supplied in a plastic bag. The curtains are in accordance with EN 1598: 2002-04. Product

Pcs.

Welding curtain w/

1

hooks, orange 1,4 x 2 m

Product no.

196-633065

Welding spatter blanket Non-asbestos woven glass fabric with a fire retardent weavelock, for protecting combustible materials and delicate machinery from spatter and spark during welding and cutting. Available in a roll 1m x 10m. Nom. Thickness 0,82mm. Max operating temperature 550 °C. The welding blanket is supplied in a carton box. Produced according to EN-ISO 25980: 2012 Product

Pcs.

Welding spatter blanket 1

22

Product no.

196-646067