Page 215 of 561

I-FLUX 238PF

Description:

Flux for TIG welding rod IALBRO-237 MF for use on Yorkalbro.

Identification:

White/Grey flux in paste form inside container.

Application

Apply with brush. Use as additional flux on both sides of the joint, especially on the inside of pipes. Working area should be adequately ventilated. The flux is corrosive. Remove with brush and hot water after brazing.

HARMFUL

3.02

Packaging data

R22 R36/37/38 R48/20/22 R52/53 S2 S22 S26 S36/39 S46 S56

Harmful if swallowed

Irritating to eyes, respiratory system and skin Harmful: danger of serious damage to health by prolonged exposure through inhalation and if swallowed Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment Keep out of the reach of children

Do not breathe dust

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice Wear suitable protective clothing and eye/face protection If swallowed, seek medical advice immediately and show this container or label Dispose of this material and its container to hazardous or special waste collection point

Gross weight in grams

Product No.

250

097-603092

*SDS available on request.

214