Page 137 of 561
COATED ELECTRODES Storing and re-drying
Minidryer-350
The Minidryer-350 is designed to restore moist electrodes, or to pre-dry electrodes before welding when this is required. The dryer may be used with electrodes of both 350 and 450 mm length. With the cover in an open position, the electrodes will protrude approximately 40 mm and are easily accessible.
The Minidryer-350 is equipped with 2 m primary cable and plug. It has a thermostat for continuous selection of the temperature from 100 to 350 °C (212 °F to 662 °F).
3.01
The dryer is very robust in design and are all-over insulated with 40 mm mineral wool. It can also stand permanently in a tilted position. When the dryer is in a tilted position, the cover cannot stand open, but always closes to prevent the intrusion of unwanted moist air. When the dryer is tilted, a rim around the opening prevents rainwater from entering.
The Minidryer-350
Ordering Information: Minidryer-350.
Product number: 094-637827.
Caution:
Use gloves when handling warm electrodes from inside the Minidryer350. This product should be used for drying electrodes only.
Type
Minidryer350
136
Mains Voltage V
Heater Output W
230, 50/60 Hz
400
Primary Operating
Width x Depth x Height Current Temperature Inner Dimensions Outer Dimensions A °C mm mm
1.8
100 to 350
Ø100 x 460
170 x 170 x 570
Electrode Capacity
kg
Net Weight kg
8
7